.gitignore

@@ -1 +0,0 @@
-nftables.conf

Makefile

@@ -1,25 +0,0 @@
-SRC = ./
-NFT = nftables.conf.nft
-
-all:
-	$(info run make makeconf to unify .nft files into nftables.conf)
-	$(info run make install to install nftables.conf in /etc and set as current ruleset)
-	$(info run make uninstall to replace /etc/nftables.conf with backup and set as current ruleset)
-
-makeconf:
-	$(info running makeconf.sh)
-	$(SRC)makeconf.sh
-
-install: makeconf
-	$(info backing up current nftables rules)
-	cp /etc/nftables.conf $(SRC)backup.conf || nft list ruleset > $(SRC)backup.conf
-	$(info installing new nftables rules)
-	cp $(SRC)$(NFT) /etc/nftables.conf
-	$(info reloading nftables rules)
-	nft -f /etc/nftables.conf
-
-uninstall:
-	$(info replacing nftables.conf with backup)
-	cp $(SRC)backup.conf /etc/nftables.conf
-	$(info reloading nftables rules)
-	nft -f /etc/nftables.conf

defines.nft

@@ -1,27 +0,0 @@
-# Networks
-define VPN_SUBNET = 10.8.0.0/24
-
-# TCP only services
-define SSH_PORT1 = 22
-define SSH_PORT2 = 8022
-define HTTP_PORT = 80
-define HTTPS_PORT = 443
-define SYNCPLAY_PORT = 60000
-define TERRARIA_PORT = 7777
-define MAINPAGE_PORT = 3000
-define NEXTCLOUD_PORT = 3001
-define GITEA_PORT = 3002
-define POSTGRESQL_PORT = 5432
-
-# TCP and UDP services (needs to go in both sets)
-define DNS_PORT = 53
-define OPENTTD_PORT = 3979
-
-# UDP only services
-define DHCP_IN_PORT = 67
-define DHCP_OUT_PORT = 68
-define OPENVPN_PORT = 1194
-define FACTORIO_PORT = 34197
-define CSTRIKE_PORT = 27015
-define SNMP_POLL_PORT = 161
-define SNMP_TRAP_PORT = 162

filter.nft

@@ -1,64 +1,17 @@
 #!/usr/bin/nft
 flush ruleset
 
-include "./defines.nft"
-include "/var/geoipsets/dbip/nftset/ipv4/*.ipv4"
-
 table ip filter {
-	set allowed_tcp_ports {
-		type inet_service;
-		flags constant;
-		elements = {
-			$SSH_PORT1, $SSH_PORT2, $DNS_PORT, $HTTP_PORT, $HTTPS_PORT, $SYNCPLAY_PORT,
-			$TERRARIA_PORT, $OPENTTD_PORT, $MAINPAGE_PORT, $NEXTCLOUD_PORT, $GITEA_PORT,
-			$POSTGRESQL_PORT
-		};
-	}
-
-	set allowed_udp_ports_in {
-		type inet_service;
-		flags constant;
-		elements = { $DNS_PORT, $DHCP_IN_PORT, $OPENVPN_PORT, $FACTORIO_PORT, $OPENTTD_PORT, $CSTRIKE_PORT, $SNMP_POLL_PORT, $SNMP_TRAP_PORT }
-	}
-
-	set allowed_udp_ports_out {
-		type inet_service;
-		flags constant;
-		elements = { $DNS_PORT, $DHCP_OUT_PORT, $SNMP_POLL_PORT }
-	}
-
-	set ipv4_geo_blacklist {
-		type ipv4_addr;
-		flags interval;
-		elements = { };
-	}
-
 	chain in {
 		type filter hook input priority filter; policy drop;
-		ip saddr @ipv4_geo_blacklist drop;
-		ct state vmap { invalid : drop, related : accept, established : accept };
-		iifname "lo" accept;
-		icmp type echo-request accept;
-		tcp dport @allowed_tcp_ports accept;
-		udp dport @allowed_udp_ports_in accept;
+		ct state invalid drop;
+		ct state {related,established} accept;
 	}
-
 	chain forward {
 		type filter hook forward priority filter; policy drop;
-		comment "this routes vpn traffic";
-		ct state related,established accept;
-		iifname "tun0" oifname "eth0" accept;
 	}
 
 	chain out {
 		type filter hook output priority filter; policy drop;
-		ip daddr @ipv4_geo_blacklist drop;
-		ct state vmap { invalid : drop, related : accept, established : accept, new : accept };
-		udp dport @allowed_udp_ports_out accept;
-		oifname "lo" accept;
-		icmp type echo-reply accept;
 	}
 }
-
-include "./nat.nft"
-

makeconf.sh

@@ -1,50 +0,0 @@
-#!/bin/bash
-
-# ${1} is original filename
-# ${2} is counter (start at 0)
-# ${3} is file to replace from
-replace(){
-  # change newlines to Ñ so we can use it as replacement pattern
-  local pattern=$(sed ':a;N;$!ba;s/\n/Ñ/g;s/\(\/\|\.\)/\\\1/g' "${3}")
-  if [ ${2} != "0" ]
-  # Ñ is changed back to newlines before saving file
-  then
-    local new_content="$(sed "1,/^include \"\.\/[a-z]\+\.nft\"$/{s/^include \"\.\/[a-z]\+\.nft\"$/${pattern}/}" "${1}""$(bc -l <<< "${2} - 1")".nft | sed 's/Ñ/\n/g')";
-    echo "${new_content}" > "${1}${2}".nft
-  else
-    local new_content="$(sed "1,/^include \"\.\/[a-z]\+\.nft\"$/{s/^include \"\.\/[a-z]\+\.nft\"$/${pattern}/}" "${1}".nft | sed 's/Ñ/\n/g')";
-    echo "${new_content}" > "${1}${2}".nft
-  fi
-}
-
-filename=filter
-declare -i counter=0
-# only replace local files
-declare -a local_includes=( $(grep "include \"\./[a-z.]\+\"" filter.nft | awk '{print $2}' | tr -d \"))
-
-for i in ${local_includes[@]}
-  do replace "${filename}" "${counter}" "${i}"
-  counter+=1
-done
-
-#rename last temp file to nftables.conf
-counter=${counter}-1
-mv "${filename}""${counter}".nft nftables.conf
-counter=${counter}-1
-
-while [ ${counter} -ge 0 ]
-  #delete the rest of the temp files to nftables.conf
-  do rm "${filename}""${counter}".nft
-  counter=${counter}-1
-done
-
-# figure out what countries, if any, we're blocking
-declare -a countries=($(ls -1 /var/geoipsets/dbip/nftset/ipv4/))
-# figure out which line defines the elements of the blacklist set
-line="$(grep -nA3 blacklist nftables.conf | grep elements | awk 'BEGIN{FS="-"} {print $1}')"
-# insert names of the countries to block into the line that defines the elements of the set
-for i in ${countries[@]};
-  do sed -i "${line} s/elements = { \([A-Z]\{2\}\.ipv4,\? \)*/elements = { \1\$${i}, /" nftables.conf
-done
-# delete unnecesary last comma
-sed -i "${line} s/, }/ }/" nftables.conf

nat.nft

@@ -1,12 +0,0 @@
-table nat {
-	chain prerouting {
-		type nat hook prerouting priority 0;
-		comment "this is necessary even if empty";
-	}
-
-	chain postrouting {
-		type nat hook postrouting priority 100;
-		comment "enable NAT for VPN";
-		iifname "tun0" oifname "eth0" ip saddr $VPN_SUBNET masquerade;
-	}
-}